LOCTITE Universal Fixmaster Dispenser (pistolet ręczny do podwójnych kartuszy 200ml, 400ml, 490ml)
Nr
IDH.1372751
Cena
569,28 PLN netto
Skojarzone produkty:
- LOCTITE EA 9497 - 400ml (dwuskładnikowy klej epoksydowy, szary, do 180 °C) (IDH.2053833)
- LOCTITE EA 9466 - 400ml (dwuskładnikowy klej epoksydowy, kremowy, do 120 °C) (IDH.2057343)
- LOCTITE EA 9450 - 400ml (klej epoksydowy, półprzezroczysty, do 100 °C) (IDH.2036815)
- LOCTITE SI 5616 - 400ml (silikon dwuskładnikowy, szybko wiążący, biały) (IDH.2056399)
- LOCTITE EA 9492 - 400ml (klej epoksydowy, biały, do 180 °C) (IDH.2052297)
- LOCTITE SI 5710 - 400ml (silikon dwuskładnikowy, bezbarwny) (IDH.2571794)
- LOCTITE SI 5610 - 400ml (silikon dwuskładnikowy, szybko wiążący, czarny) (IDH.2056417)
- LOCTITE EA 9461 - 400ml (klej epoksydowy, szary, do 120 °C) (IDH.2061251)
- LOCTITE SI 5615 - 400ml (silikon dwuskładnikowy, szybko wiążący, czarny) (IDH.2056422)
- TEROSON MS 9399 WH - 400ml, 2K, 1:1 (dwuskładnikowa masa klejąco-uszczelniająca, biała) (IDH.2768189)
- TEROSON MS 9399 BK - 400ml, 2K, 1:1 (dwuskładnikowa masa klejąco-uszczelniająca, czarna) (IDH.2768186 )
- LOCTITE EA 3425 - 200ml (klej epoksydowy) (IDH.2063050)
- LOCTITE EA 9489 - 400ml (klej epoksydowy, szary, do 100 °C) (IDH.2056904)
- LOCTITE EA 9483 - 400ml (klej epoksydowy, przezroczysty, do 150 °C) (IDH.2056389)
LOCTITE Universal Fixmaster Dispenser (pistolet ręczny do podwójnych kartuszy 200ml, 400ml, 490ml)
Skojarzone produkty:
- LOCTITE EA 9497 - 400ml (dwuskładnikowy klej epoksydowy, szary, do 180 °C) (IDH.2053833)
- LOCTITE EA 9466 - 400ml (dwuskładnikowy klej epoksydowy, kremowy, do 120 °C) (IDH.2057343)
- LOCTITE EA 9450 - 400ml (klej epoksydowy, półprzezroczysty, do 100 °C) (IDH.2036815)
- LOCTITE SI 5616 - 400ml (silikon dwuskładnikowy, szybko wiążący, biały) (IDH.2056399)
- LOCTITE EA 9492 - 400ml (klej epoksydowy, biały, do 180 °C) (IDH.2052297)
- LOCTITE SI 5710 - 400ml (silikon dwuskładnikowy, bezbarwny) (IDH.2571794)
- LOCTITE SI 5610 - 400ml (silikon dwuskładnikowy, szybko wiążący, czarny) (IDH.2056417)
- LOCTITE EA 9461 - 400ml (klej epoksydowy, szary, do 120 °C) (IDH.2061251)
- LOCTITE SI 5615 - 400ml (silikon dwuskładnikowy, szybko wiążący, czarny) (IDH.2056422)
- TEROSON MS 9399 WH - 400ml, 2K, 1:1 (dwuskładnikowa masa klejąco-uszczelniająca, biała) (IDH.2768189)
- TEROSON MS 9399 BK - 400ml, 2K, 1:1 (dwuskładnikowa masa klejąco-uszczelniająca, czarna) (IDH.2768186 )
- LOCTITE EA 3425 - 200ml (klej epoksydowy) (IDH.2063050)
- LOCTITE EA 9489 - 400ml (klej epoksydowy, szary, do 100 °C) (IDH.2056904)
- LOCTITE EA 9483 - 400ml (klej epoksydowy, przezroczysty, do 150 °C) (IDH.2056389)
Unpacking and Inspection:
Carefully unpack the Loctite Universal FixMaster Dispenser and examine the items contained in the carton. Inspect unit for any damage that might have occurred in transit. If such damage has occurred, notify the carrier immediately. Claims for damage must be made by the consignee to the carrier and should be then reported to the manufacturer.
Items supplied: Manual Dispenser
- Assembled ready for 400 ml 1:1 ratio cartridges 1 Multi-Ratio Plunger Kit
Container Types:
This dispenser is suitable to dispense: 200 ml dual cartridges 1:1, 2:1, 4:1, 10:1 ratios 400 ml dual cartridges 1:1, 2:1, 4:1 ratios 490 ml dual cartridges 10:1 ratio
Technical data: Weight: 1,72 kg Mechanical Advantage: 26:1
Plunger Disk Removal: Place applicator with release knob on floor, Put both thumbs on front plate and fingers behind the plunger disk you desire to remove, Move fingers forward toward thumbs until plunger disk snaps off rod. If the plunger disk is hard to remove, use a rubber mallet and gently tap until plunger disk becomes loose,
Plunger Disk Assembly: Put socket of plunger disk over rod shaft, Push firmly onto the rod shaft until plunger disk snaps in place. There should be two snapping sounds which will ensure the plunger disks are firmly attached. Some twisting of the plunger disk may be required to achieve the second snap. Both plunger disks should be parallel with each other. This will ensure proper mixing of materials.
Further information about the product: biuro@woronko-kleje.pl
Carefully unpack the Loctite Universal FixMaster Dispenser and examine the items contained in the carton. Inspect unit for any damage that might have occurred in transit. If such damage has occurred, notify the carrier immediately. Claims for damage must be made by the consignee to the carrier and should be then reported to the manufacturer.
Items supplied:
- Assembled ready for 400 ml 1:1 ratio cartridges
Container Types:
This dispenser is suitable to dispense:
Technical data:
Plunger Disk Removal:
Plunger Disk Assembly:
Further information about the product: biuro@woronko-kleje.pl