Serwis korzysta z plików cookies w celu świadczenia spersonalizowanych usług na najwyższym poziomie, w tym usług statystycznych oraz w celu dostosowania zawartości do indywidualnych preferencji użytkowników. Zapisywanie plików cookies można wyłączyć w ustawieniach przeglądarki. Więcej informacji
OK
Utwórz konto
[zamknij]     

BONDERITE L-CA 696 - 1kg (miękki smar przeznaczony do malowania powierzchni w celu ochrony przed stopionymi metalami lub topnikami / soft grease designed for painting onto surfaces for protection from molten metals or fluxes) | (aka. DELTACAST 696)

BONDERITE L-CA 696 - 1kg (miękki smar przeznaczony do malowania powierzchni w celu ochrony przed stopionymi metalami lub topnikami / soft grease designed for painting onto surfaces for protection from molten metals or fluxes) | (aka. DELTACAST 696) (IDH.1238790)

Product descritpion:
BONDERITE L-CA 696 ACHESON is a soft grease, containing refractory pigments and is designed for painting onto ladles or other surfaces in need of protection from attack by molten metals or fluxes. When immersed in molten metal it produces a dry, aerated insulating coating which is extremely effective in repelling molten metal.
Special Features:
- Extremely effective in repelling molten metal
- Easy application and repair
- Insulating - reduces thermal fatigue
- Designed to reduce hazards
- Long coating life and easily removable

BONDERITE L-CA 696 ACHESON has been designed to facilitate easy application and repair of coatings, providing a long coating life. Its formulation has been optimized to minimize hazards during application and use. BONDERITE L-CA 696 ACHESON prolongs the life of protected items both directly, but also indirectly as a result of the ease of coating removal without damaging the substrate. Its insulating properties provide protection against thermal fatigue. Further informations on the product can be obtained from the local technical department: biuro@woronko-kleje.pl
Preliminary Statement:
Prior to use it is necessary to read the Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Handling:
BONDERITE L-CA 696 ACHESON is ready for use. Its consistency promotes facile correct application. BONDERITE L-CA 696 ACHESON requires no special treatment. Dilution is not recommended.
Application:
It is recommended that surfaces to be coated are thoroughly cleaned for example by grit blasting. Best results are obtained by brushing BONDERITE L-CA 696 ACHESON onto surfaces pre-heated to between 120 and 150 °C. Cold application is also possible. In this case the coating should be allowed to dry before use. The coating is "cured" by the first immersion in molten metal. It is not detrimental to the coating if it flames a little during this stage of application. In areas of high wear the coating may be repaired by a furtherbrush application of BONDERITE L-CA 696 ACHESON. Coating life varies with the conditions of use and the formulation of the melt.
Disposal:
BONDERITE L-CA 696 ACHESON does not mix readily with water and may be removed from waste water with oil skimmers. Spills should be collected and mopped up with absorbent material. Cleaning up can be completed with solvents such as white spirit. BONDERITE L-CA 696 ACHESON may be burnt under controlled conditions.
Coating removal
Residual coatings are usually removed with compressed air. Occasional thorough cleaning by grit or bead blasting may be desirable for some applications.
Storage:
Store BONDERITE L-CA 696 ACHESON between 0 °C and 35 °C. Freezing will not damage the stability of the product. Storage in direct sunlight may overheat BONDERITE L-CA 696 ACHESON and impair performance. Always tightly reseal the container to prevent evaporation or contamination.

Shelf Life : 24 months from date of qualification under original seal. The viscosity of the product may decrease over time. However, this will not affect the way of application and the product properties.
Parameters:
  • Pigment reflectory: pigment
  • Carrier : selected mineral oils
  • Diluent : not recommended
  • Density, kg/m³ : 1,250
  • Consistency : NLGI grade 0

    Full technical information about the product is in the technical data sheet.
  • Asortyment