Serwis korzysta z plików cookies w celu świadczenia spersonalizowanych usług na najwyższym poziomie, w tym usług statystycznych oraz w celu dostosowania zawartości do indywidualnych preferencji użytkowników. Zapisywanie plików cookies można wyłączyć w ustawieniach przeglądarki. Więcej informacji
OK
Utwórz konto
[zamknij]     
Product description:
BONDERITE L-CA HKKS ACHESON is a dispersion of high purity semi-colloidal graphite in water, proven over a long history as quality release agent in gravity and low pressure die casting of non-ferrous metals. The fine graphite coating eases the release of castings and protects insulating coatings from premature wear.

Special Features:
-High covering power.
-Superior release and temperature resistance.
-Pore-free casting.

BONDERITE L-CA HKKS ACHESON is economic in use due to its high covering power. The constant quality of the product ensures excellent reproducibility. BONDERITE L-CA HKKS ACHESON provides superior release and good high temperature resistance. Due to the absence of gas emitting raw materials pore-free castings are obtained.
Direction for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.

Dilution:
BONDERITE L-CA HKKS ACHESON is a concentrate and should be diluted with water before application by spray, dip or brush. To dilute BONDERITE L-CA HKKS ACHESON, soft water is stirred slowly into the concentrate. In open systems, as in dip application, it is suggested to keep the pH between 8 and 9. Ammonia is preferred to adjust the pH of diluted BONDERITE L-CA HKKS ACHESON. On storage a sediment may form in the container. The concentrate should be homogenized before use. Agitation may be sufficient but stirring is preferred. The diluted product should also be agitated occasionally during use.

Dilution Ratios:
BONDERITE L-CA HKKS ACHESON is usually applied by dip or spray, diluted one part with 5 to 50 parts of soft water. The product may be applied neat on insulating coatings by brush.
Storage:
  • Store BONDERITE L-CA HKKS ACHESON in a cool place, but do not allow it to freeze. Product should not be used once frozen. Always tightly reseal the container to prevent contamination.
  • Shelf-Life : 24 months from date of qualification under original seal.
    Parameters:
  • Appearance : homogeneous grey-black high viscous liquid
  • Pigment : high purity semi-colloidal graphite
  • Carrier : water
  • Diluent : soft or demineralized water
  • Solids : content, % 21.5

    Full technical information can be found in technical data sheet
  • Asortyment