Serwis korzysta z plików cookies w celu świadczenia spersonalizowanych usług na najwyższym poziomie, w tym usług statystycznych oraz w celu dostosowania zawartości do indywidualnych preferencji użytkowników. Zapisywanie plików cookies można wyłączyć w ustawieniach przeglądarki. Więcej informacji
OK
Utwórz konto
[zamknij]     
Product description:
TEROSON WX 180 POLISH is a solvent-based paint renovator with a special combination of hard waxes (carnauba wax), high-gloss flow- and polishing agents. The material can be used after car wash by using a wet sponge.

Application areas:
TEROSON WX 180 POLISH is especially useful for renovating the paintwork of used cars where the paint has suffered medium to severe weathering. TEROSON WX 180 POLISH cleans, polishes and protects car paintwork in one operation. It removes dirt which cannot be removed by thorough washing, it dissolves tar splashes, removes oil and insect residues and also removes small particles of surface rust. Further information about the product: biuro@woronko-kleje.pl

Directions for use:
Preliminary statement:
Prior to application it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed.

Application:
The vehicle is to be washed thoroughly before use and then dried. TEROSON WX 180 POLISH can also be applied directly onto the painted car body directly after car wash. Shake container well before use. Apply TEROSON WX 180 POLISH with a soft cloth or a damp sponge with gentle pressure in circular motions. After drying polish with cotton wool or cotton cloth. Do not process in direct sunlight or onhot car body.

Storage:
  • Frost sensitive : no
  • Recommended storage temperature : 10 to 20 °C
  • Shelf life : 36 months

    Parameters:
  • Colour : light blue
  • Odour : smells of wax and of petrol
  • Consitency : liquid
  • Density : approx. 0.93 g/cm³
  • Solid : approx. 20 %
  • Viscosity (DIN 53211, 4 mm) : approx. 40 s
  • pH value : approx. 9.3
  • Application temperature : 15 to 25 °C

    Full technical information can be found in technical data sheet
  • Asortyment