Serwis korzysta z plików cookies w celu świadczenia spersonalizowanych usług na najwyższym poziomie, w tym usług statystycznych oraz w celu dostosowania zawartości do indywidualnych preferencji użytkowników. Zapisywanie plików cookies można wyłączyć w ustawieniach przeglądarki. Więcej informacji
OK
Utwórz konto
[zamknij]     

LOCTITE LB 8012 - 454g (smar anti-seize z dodatkiem MoS2, do 400 °C)

brak obrazka

Product description:
LOCTITE® LB 8012 contains 65% molybdenum disulfide for maximum lubricity. It is a heavy, black paste with unsurpassed lubricating qualities. Machine tool marks and other irregularities are reduced to a mirror-smooth finish by its lubricating action. LOCTITE® LB 8012 reduces friction on threaded fasteners, including bolts, nuts and studs. The low and uniform friction coefficient of 0.06 creates reliable assembly conditions.Lubricant stays in place through heat, load and vibration to ensure a trouble-free disassembly. For the ultimate in low friction solid lubrication: press fit - no binding, no chatter or stick-slip, low force; threaded fasteners - higher clamping for torque, less torque for same clamping, ease of removal (antiseize); slip-fit - easy assembly, disassembly, ready alignment; metalworking - drawing, stamping, coining, extruding, forging -lower friction, eliminates stratching, galling, metal pick-up, lengthens die life; splines - reduces wear and binding; gears - stands up under high static or slow-moving loads. This product is typically used in applications with an operating range of -29 °C to +400 °C. Further information about the product: biuro@woronko-kleje.pl

Directions for use:
1. For best performance the mating surface should be clean and free of grease. You can use LOCTITE SF 7063.
2. Note: When grinding or wire brushing, use a dust mask. Dust from cleaning threads may contain metal compounds. Inhalation may cause lung injury or other harm.
3. Apply thin coating to mating surfaces, assemble.
4. Do not use thinner.
5. Keep container tightly closed when not in use.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Technology : Anti-Seize
  • Appearance : Dark gray paste
  • Cure : Not applicable
  • Application : Lubrication
  • Specific Benefit : Provides smoother than new metal surfaces
  • Specific Gravity at 25 °C : 1.92
  • Penetration, ISO 2137, unworked, 1/10 mm : 300 to 350

    Full technical information can be found in technical data sheet
  • Asortyment