Serwis korzysta z plików cookies w celu świadczenia spersonalizowanych usług na najwyższym poziomie, w tym usług statystycznych oraz w celu dostosowania zawartości do indywidualnych preferencji użytkowników. Zapisywanie plików cookies można wyłączyć w ustawieniach przeglądarki. Więcej informacji
OK
Utwórz konto
[zamknij]     
Product description:
The LOCTITE Cyanoacrylate Dispensing Valve provides high-resolution stroke adjustment for accurate dispensing of small amounts of all low to medium viscosity adhesives. It is designed specifically for presssure-time appliactions and must be used in conjunction with a controller and product reservoir. The dispensing valve has single acting, spring return, stroke control. Fine adjustment of flow rate is achieved by turning the flow control dial on top of the valve. The valve can be used in stationary mounted applications or in combination with ad advancing slide. Further information on the product can be obtained from the local technical department: biuro@woronko-loctite.pl

Recommended products:
  • Cyanoacrylate adhesives

    Features:
  • For applying miniature amounts,
  • Compact size and weight,
  • Stroke adjustment for fine-tuning dispense characteristic,
  • Fail Safe - spring assisted close,
  • Diaphagram valve, no seals,
  • Bubble free no-drip dispensing,

    Parameters:
  • Weight: 130 g
  • Max. Input Fluid Pressure: 5 bar (70 psi)
  • Mounting Hole: (1) 10-32 UNF
  • Dimensions (W x H x D): Ø 78,5 mm x 30 mm
  • Air Inlet Port: 1/4 '' tube fitting
  • Air Input: 5-6 bar (70-90 psi), filtered to a max. of 10 μm
  • Asortyment